Category:Home & Garden|Yard, Garden & Outdoor Living|Ponds & Water Features|Outdoor Fountains

Product introduction:

This solar brushless water pump uses Hall elements with high sensitivity and low power consumption, cooperates with efficient and intelligent electronic circuit drive, and adopts a volute design in hydrodynamics for the impeller cavity to reduce the resistance of water flow, so that the overall performance is better than that of traditional structures. The efficiency of the solar water pump is increased by 20%. It also solves the shortcomings of the current brushless solar water pump is difficult to start, low efficiency and poor stability.

The water pump can be connected with nozzles of various shapes to spray different types of water.

Solar panel specifications:

Rated voltage: 7V 

Rated power: 1W 

Material: single crystal Epoxy

Pump specifications:

Working voltage: DC 7V 

Working current: 150MA 

Maximum head: 100CM

Pump life:> 20000 

when the pump noise: <45DB 

Maximum flow: 160L / H

Diameter: 130mm

Package Included:

2x Solar Fountain

Product performance:

Spray height: 30--50cm, connect different spray heads, the spray height will be different.

When the solar panel receives sufficient sunlight, the pump will start within 3 seconds.

Instructions:

1) Assemble the product according to the schematic diagram.

2) Place the solar panel in a suitable place to ensure that it is not blocked by other objects. When the solar panel receives sufficient light, the water pump works normally.

3) When the pump is just put into the water, there is air in it, which may affect the spraying effect. It is recommended to wait for the pump to spray normally before connecting the nozzle.

Notes:

1 This product is a solar direct-drive water pump without an external battery. The height of the water spray depends entirely on the strength of the sunlight. When the sunlight is weak, the pump will not work continuously, but will automatically start repeatedly until the sunlight reaches a certain intensity The pump resumes continuous operation. When using the product, please place the product in unobstructed sunlight. The shadow will affect the normal operation of the pump.

2 The water pump must be completely immersed in water, and cannot be dehydrated for a long time. When the pump is just immersed in water, because there is air in the pump, it is recommended to insert the nozzle after the pump sprays water normally.

3 Please keep the water source clean and wash the pump regularly to prevent foreign objects from being sucked in by the pump and causing the pump to not work properly.